I have an old 91 dodge dakota 5 speed 4x4. the clutch is out..can someone tell me if it's complicated or not to change a clutch in this truck?.. will i have to pull the motor or drop the transmission?
thanks for your help
Question about my clutch?
You can drop the trans to get to the clutch without much difficulty. Then you will be able to get to the clutch. Probably about 5 hours total if you are inexperienced. Remember if you are going to the trouble to do this then have the flywheel turned and replaced the pilot bearing to preserve the life of the clutch that you are installing
Question about my clutch?
you will have to pull the drive shaft off take loose any thing that is connected to the transmission like wires and cables then take the transmission mount completely off and have a jack so you can lift and lower the transmission then take out the bolts that hold the transmission on to the engine pull back just a lil bit and the transmission is out replace the clutch and parts and put it all back on in revirse order if you need more help my email is phillipprc@yahoo.com and i have yahoo im
the best way and the cheapest way is to drop the transmition and start from there. and no its not complicated, just get a really experinced mecanic on transmitions..... mite be the master slave cylinder??? im guessing??
